Car pressure washer car wash water gun home watering sprinkler Portable 10/15/20 m | Автомобили и мотоциклы

Car pressure washer car wash water gun home watering sprinkler Portable 10/15/20 m | Автомобили и мотоциклы

[name] car wash water pipe pure copper head high pressure water gun

[Specification] length 10 15 20 meters

[Function] Washing cars, motorcycles, electric cars, watering flowers, home cleaning, etc. can be used

[Features] Pure copper head nozzle, durable, not afraid of rust

[Features] High pressure water gun, can adjust the size of the water according to different needs

Use the installation method:

1. After receiving the item, open the plastic bag, first take out 2 black rubber sealing rings, one is 4 points big and one is 6 points big. According to the size of your own faucet, you can first put the rubber sealing ring first to try the faucet. Can be put in, it is tight, choose one of them to use.

2. Take out the water pipe, select the joint with the spring, unscrew the green plastic cover, put the selected rubber seal ring, turn the green plastic cover back, and tighten.

3. Remove the gun head, place the sealing ring on the base of the water inlet of the gun head, screw the ribbed joint of the water pipe into the water inlet of the gun head, and tighten it so that the water gun is connected.

4. Put the end joint with spring directly on the faucet. Note that when setting the faucet, the hand must be held near the green plastic cover. Do not hold it on the joint below to prevent the faucet from being tight. Twisted, the plastic joint was broken.

5. All the pipes should be straightened first. Do not fold them there. Open the faucet and start to open smaller. Wait for the water to come out. Check if there is any water leakage at the joint. If there is any adjustment, no, the water will open again, it will be normal. used!

6. Adjust the water sample, you can adjust the nut on the gun head, and the water can be adjusted to the water column!

Note: The gun body is made of aluminum, the gun head and core are electroplated copper, and the hose rubber tube is covered with a layer of braided wire for decoration. This water gun only plays a role in supercharging. It mainly depends on the pressure of your tap water. The greater the pressure, the better the effect. Don't compare it with the water pressure of a professional car wash. It is pressurized by a high-pressure water pump.

Package includes

      1* car pressure washer set